Labeling Systems

HEISLER Industries manufactures pail can labelers, pressure sensitive labelers and wet glue labeling systems for some of the most commonly used plastic and metal containers.

Our labeling systems are designed to quickly and efficiently apply labels to 2-6 gallon round plastic or metal pails; square or rectangular cartons or containers & F-Style containers; ½-pint to 1 gallon round, plastic or metal pails; and small water bottles and 5-gallon water jugs.

There is a HEISLER labeling system to meet virtually any container labeling application, including:

Quart can labeling
Gallon can labeling
Paint can labeling
Round container labeling
Pail labeling (1-7 gallon)
Can labeling (1/2 pint-1 gallon)
Plastic pail labeling
Metal pail labeling
Tighthead pail labeling
F-Style labeling

Straight wall pail labeling
Straight sided pail labeling
Tapered pail labeling
Square pail labeling
Rectangular pail labeling
Box labeling
Case labeling
Square carton labeling
Rectangular carton labeling

Pressure Sensitive Labeler

With HEISLER pressure sensitive labelers, once a pail has entered the machine and trips a sensor, the label is fed onto patented label gates. These gates apply the label to the pail from the center out, following the pail taper, and insuring precise labeling. After the label has been applied to the pail, the label is wiped on tightly. Pails never stop, and are automatically oriented for pail handle to label registration. Bail lifting or pail pre-orientation is not required.

Wet Glue Labeler

Our wet glue labeler uses a Horizontal Label Magazine, which feeds the paper labels, using a series of suction cups, and roller to invert and drop the label into the label track. Using a feed roller, the label traverses over the glue roller. Because the glue roller does not control the feeding, the labels are fed accurately regardless of the glue film adjustment. The same label gate application and wipe-on occurs as in our pressure sensitive labeling machines.

Print and Apply

The print and apply option is available for both pressure sensitive and wet glue machines. This allows the printing of labels as needed, thus reducing unnecessary preprinted label inventory. A thermal transfer printer is used to print the labels with your company’s information, graphics, bar code, etc. After printing on a pressure sensitive machine the label is fed with the applicator. On a wet glue machine the label is cut to size and fed over the glue roller. Then the label is fed to the label gates and is wiped on the container as above.

HL 70,000 Series

For 2-6 gallon, round plastic or metal pails.

(HL-70) Wet Glue Pail Labeler
(HL-70PS) Pressure Sensitive Pail Labeler
(HL-70CPS) Pressure Sensitive Pail Labeler w/Compact Conveyer
(HL-70DB) Front and Back Wet Glue Pail Labeler
(HL-70DBPS) Front and Back Pressure Sensitive Pail Labeler

HL 72,000 Series

For square or rextangular cartons or containers & F-Style containers.

(HL-72) Wet Glue Labeler
(HL-72PS) Pressure Sensitive Labeler

HL 71,000 Series

For 1/2 pint to 1 gallon round, plastic or metal pails.

(HL-71) Wet Glue Labeler
(HL-71PS) Pressure Sensitive Labeler

HL 73,000 Series

For various water bottles.

(HL-73LPS) Large Water Bottle Labeler
(HL-73SPS) Small Water Bottle Labeler

Accessories


Turntable	Pneumatic Glue Pump